Installing The Midplane - Supermicro SuperStorage 2029P-DN2R24L User Manual

SuperStorage Server 2029P-DN2R24L User's Manual

Installing the Midplane

Installing the Midplane Into the Chassis
1. Power down the system as described in Section 3-1 and open the chassis covers as
described in Section 3-2.
2. Put the midplane into the midplane bracket, aligning the holes in the midplane with
those in the bracket.
3. Reinstall the fourteen screws securing the midplane to the midplane bracket.
4. Reconnect the cabling to the midplane.
5. Place the midplane and midplane bracket into the chassis and secure them with four
screws in the sidewalls and two at the base of the chassis.
6. Plug the power cords into the rear of the power supplies and power up the system.
Midplane Bracket
Midplane
Figure 3-17. Installing the Midplane
52