12.12 Device Information - Endress+Hauser Proline Promass I 300 PROFINET Operating Instructions Manual

Diagnostics and troubleshooting
Parameter
Device tag
Serial number
Firmware version
222
Options Description
Restart device The restart resets every parameter whose data are in the volatile memory (RAM)
to the factory setting (e.g. measured value data). The device configuration remains
unchanged.
Restore S-DAT backup Restore the data that are saved on the S-DAT. The data record is restored from the
electronics memory to the S-DAT.


12.12 Device information

The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
Serial number
Firmware version
Device name
Manufacturer
Order code
Extended order code 1
Extended order code 2
Extended order code 3
ENP version
Parameter overview with brief description
Description
Shows name of measuring point.
Shows the serial number of the measuring
device.
Shows the device firmware version installed. Character string in the format
This option is displayed only in an alarm condition.
User interface
Max. 32 characters such as
lower-case letters or numbers.
Max. 11-digit character string
comprising letters and
numbers.
xx.yy.zz
Proline Promass I 300 PROFINET
→  222
→  222
→  222
→  223
→  223
→  223
→  223
→  223
→  223
Factory setting
Promass
–
–
Endress+Hauser