Table Of Contents - Endress+Hauser Proline Promass I 300 PROFINET Operating Instructions Manual

Proline Promass I 300 PROFINET

Table of contents

1 About this document . . . . . . . . . . . . . . . . 6
1.1 Document function . . . . . . . . . . . . . . . . . . . . .
1.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2.1 Safety symbols . . . . . . . . . . . . . . . . . .
1.2.2 Electrical symbols . . . . . . . . . . . . . . . . 6
1.2.3 Communication symbols . . . . . . . . . . . 6
1.2.4 Tool symbols . . . . . . . . . . . . . . . . . . . . 7
1.2.5 Symbols for
certain types of information . . . . . . . . . 7
1.2.6 Symbols in graphics . . . . . . . . . . . . . . . 7
1.3 Documentation . . . . . . . . . . . . . . . . . . . . . . . . 8
1.3.1 Standard documentation . . . . . . . . . . . 8
1.3.2 Supplementary device-dependent
documentation . . . . . . . . . . . . . . . . . . 8
1.4 Registered trademarks . . . . . . . . . . . . . . . . . . . 8
2 Safety instructions . . . . . . . . . . . . . . . . 10
2.1 Requirements for the personnel . . . . . . . . . . . 10
2.2 Designated use . . . . . . . . . . . . . . . . . . . . . . .
2.3 Workplace safety . . . . . . . . . . . . . . . . . . . . . . 11
2.4 Operational safety . . . . . . . . . . . . . . . . . . . . . 11
2.5 Product safety . . . . . . . . . . . . . . . . . . . . . . . . 11
2.6 IT security . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.7 Device-specific IT security . . . . . . . . . . . . . . . . 12
2.7.1 Protecting access via hardware write
protection . . . . . . . . . . . . . . . . . . . . . 12
2.7.2 Protecting access via a password . . . . 12
2.7.3 Access via Web server . . . . . . . . . . . . 13
2.7.4 Access via service interface (CDI-
RJ45) . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Product description . . . . . . . . . . . . . . . . 15
3.1 Product design . . . . . . . . . . . . . . . . . . . . . . . . 15
4 Incoming acceptance and product
identification . . . . . . . . . . . . . . . . . . . . . 16
4.1 Incoming acceptance . . . . . . . . . . . . . . . . . . . 16
4.2 Product identification . . . . . . . . . . . . . . . . . . . 16
4.2.1 Transmitter nameplate . . . . . . . . . . . 17
4.2.2 Sensor nameplate . . . . . . . . . . . . . . . 18
4.2.3 Symbols on measuring device . . . . . .
5 Storage and transport . . . . . . . . . . . . . 20
5.1 Storage conditions . . . . . . . . . . . . . . . . . . . . . 20
5.2 Transporting the product . . . . . . . . . . . . . . . . 20
5.2.1 Measuring devices without lifting
lugs . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.2 Measuring devices with lifting lugs . .
5.2.3 Transporting with a fork lift . . . . . . . . 21
5.3 Packaging disposal . . . . . . . . . . . . . . . . . . . . . 21
Endress+Hauser
6 Installation . . . . . . . . . . . . . . . . . . . . . . . 22
6 6.1 Installation conditions . . . . . . . . . . . . . . . . . . 22
6.1.1 Mounting position . . . . . . . . . . . . . . . 22
6 6.1.2 Environment and process
requirements . . . . . . . . . . . . . . . . . .
6.1.3 Special mounting instructions . . . . . . 25
6.2 Mounting the measuring device . . . . . . . . . . . 28
6.2.1 Required tools . . . . . . . . . . . . . . . . . . 28
6.2.2 Preparing the measuring device . . . . . 28
6.2.3 Mounting the measuring device . . . . . 28
6.2.4 Turning the transmitter housing . . . . 29
6.2.5 Turning the display module . . . . . . . . 29
6.3 Post-installation check . . . . . . . . . . . . . . . . . . 30
7 Electrical connection . . . . . . . . . . . . . . 31
7.1 Connection conditions . . . . . . . . . . . . . . . . . . 31
7.1.1 Required tools . . . . . . . . . . . . . . . . . . 31
7.1.2 Requirements for connecting cable . . . 31
10 7.1.3 Terminal assignment . . . . . . . . . . . . . 34
7.1.4 Device plugs available . . . . . . . . . . . . 34
7.1.5 Pin assignment of device plug . . . . . . 34
7.1.6 Preparing the measuring device . . . . . 34
7.2 Connecting the measuring device . . . . . . . . . . 35
7.2.1 Connecting the transmitter . . . . . . . . 35
7.2.2 Integrating the transmitter into a
network . . . . . . . . . . . . . . . . . . . . . . 39
7.2.3 Connecting the remote display and
operating module DKX001 . . . . . . . .
7.3 Ensuring potential equalization . . . . . . . . . . . 41
7.3.1 Requirements . . . . . . . . . . . . . . . . . . 41
7.4 Special connection instructions . . . . . . . . . . . . 42
7.4.1 Connection examples . . . . . . . . . . . . . 42
7.5 Hardware settings . . . . . . . . . . . . . . . . . . . . . 45
7.5.1 Setting the device name . . . . . . . . . . . 45
7.5.2 Activating the default IP address . . . . 47
7.6 Ensuring the degree of protection . . . . . . . . . . 47
7.7 Post-connection check . . . . . . . . . . . . . . . . . . 48
8 Operation options . . . . . . . . . . . . . . . . . 49
8.1 Overview of operation options . . . . . . . . . . . . 49
8.2 Structure and function of the operating
menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
8.2.1 Structure of the operating menu . . . .
8.2.2 Operating philosophy . . . . . . . . . . . . 51
8.3 Access to the operating menu via the local
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3.1 Operational display . . . . . . . . . . . . . . 52
8.3.2 Navigation view . . . . . . . . . . . . . . . .
20
8.3.3 Editing view . . . . . . . . . . . . . . . . . . . 55
21
8.3.4 Operating elements . . . . . . . . . . . . . . 57
8.3.5 Opening the context menu . . . . . . . . . 57
8.3.6 Navigating and selecting from list . . . 59
8.3.7 Calling the parameter directly . . . . . . 59
8.3.8 Calling up help text . . . . . . . . . . . . . . 60
Table of contents
24
41
50
50
52
53
3