Configuring The Current Input - Endress+Hauser Proline Promass I 300 PROFINET Operating Instructions Manual

Proline Promass I 300 PROFINET
Parameter
I/O module 1 to n terminal numbers Shows the terminal numbers used by the I/O
I/O module 1 to n information
I/O module 1 to n type
Apply I/O configuration
I/O alteration code
* Visibility depends on order options or device settings
Endress+Hauser
Navigation
"Setup" menu → I/O configuration
‣
I/O configuration
I/O module 1 to n terminal numbers
I/O module 1 to n information
I/O module 1 to n type
Apply I/O configuration
I/O alteration code
Parameter overview with brief description
Description
module.
Shows information of the plugged I/O
module.
Shows the I/O module type.
Apply parameterization of the freely
configurable I/O module.
Enter the code in order to change the I/O
configuration.
10.5.6

Configuring the current input

The "Current input" wizard guides the user systematically through all the parameters that
have to be set for configuring the current input.
User interface / Selection /
User entry
• Not used
• 26-27 (I/O 1)
• 24-25 (I/O 2)
• 22-23 (I/O 3)
• Not plugged
• Invalid
• Not configurable
• Configurable
• PROFINET
• Off
*
• Current output
*
• Current input
*
• Status input
• Pulse/frequency/switch
*
output
*
• Double pulse output
*
• Relay output
• No
• Yes
Positive integer
Commissioning
→  99
→  99
→  99
→  99
→  99
Factory setting
–
–
Off
No
0
99