Input Values" Submenu - Endress+Hauser Proline Promass I 300 PROFINET Operating Instructions Manual

Operation
Parameter
Assign process variable
Totalizer value 1 to n
Totalizer status 1 to n
Totalizer status (Hex) 1 to n
146
Parameter overview with brief description
Prerequisite
–
In the Assign process variable
parameter one of the following
options is selected:
• Volume flow
• Mass flow
• Corrected volume flow
• Total mass flow
• Condensate mass flow
• Energy flow
• Heat flow difference
–
In Target mode parameter,
the Auto option is selected.
11.4.3

"Input values" submenu

The Input values submenu guides you systematically to the individual input values.
Navigation
"Diagnostics" menu → Measured values → Input values
‣
Input values
‣
Current input 1 to n
‣
Status input 1 to n
Input values of current input
The Current input 1 to n submenu contains all the parameters needed to display the
current measured values for every current input.
Description
Select process variable for
totalizer.
Displays the current totalizer
counter value.
Displays the current totalizer
status.
Displays the current status
value (hex) of the totalizer.
Proline Promass I 300 PROFINET
Selection / User Factory setting
entry / User
interface
• Volume flow Volume flow
• Mass flow
• Corrected volume
flow
• Total mass flow
• Condensate mass
flow
• Energy flow
• Heat flow
difference
Signed floating-point 0 m³
number
• Good –
• Uncertain
• Bad
0 to 0xFF –
→  146
→  147
Endress+Hauser