12.11 Resetting The Measuring Device; 12.11.1 Function Range Of "Device Reset" Parameter; 12.12 Device Information - Endress+Hauser Proline Prosonic Flow W 400 Operating Instructions Manual

Proline Prosonic Flow W 400 HART
Endress+Hauser
Info number
I1622 Calibration changed
I1624 All totalizers reset
I1625 Write protection activated
I1626 Write protection deactivated
I1627 Web server: login successful
I1628 Display: login successful
I1629 CDI: login successful
I1631 Web server access changed
I1632 Display: login failed
I1633 CDI: login failed
I1634 Reset to factory settings
I1635 Reset to delivery settings
I1649 Hardware write protection activated
I1650 Hardware write protection deactivated
I1725 Sensor electronic module (ISEM) changed

12.11 Resetting the measuring device

The entire device configuration or some of the configuration can be reset to a defined state
with the Device reset parameter (→  114).

12.11.1 Function range of "Device reset" parameter

Options Description
Cancel No action is executed and the user exits the parameter.
To delivery settings Every parameter for which a customer-specific default setting was ordered is reset
to the customer-specific value. All other parameters are reset to the factory setting.
Restart device The restart resets every parameter with data stored in volatile memory (RAM) to
the factory setting (e.g. measured value data). The device configuration remains
unchanged.

12.12 Device information

The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
Serial number
Firmware version
Diagnosis and troubleshooting
Info name
→  146
→  146
→  146
145