Switching On The Device - Weinmann MEDUVENT Standard Instructions For Use Manual

6.1 Switching on the device

Requirements If present: The device has been connected to the oxygen supply
(see "4.4 Connecting the oxygen supply", page
1. Briefly press the On/Off button
2. If one or more conditions are not met: Do not operate the
Result The device is switched on and on standby.
An automatic self-test starts, which comprises the following
sequence:
• Alarm light flashes twice and 2 short test tones are emitted
in parallel
• The start screen appears
The self-test is successful when all of the steps have been
completed.
After the self-test, the device displays the start menu:
device.
.
MEDUVENT Standard
6 Operation
41).
EN 55