Set Ssh; Set Https - HIKVISION DS-2TD6267-75C4L/WY User Manual

Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
Enable Certificate Expiration Alarm
Steps
1. Check Enable Certificate Expiration Alarm. If enabled, you will receive an email or the camera
links to the surveillance center that the certificate will expire soon, or is expired or abnormal.
2. Set the Remind Me Before Expiration (day), Alarm Frequency (day) and Detection Time (hour).
Note
If you set the reminding day before expiration to 1, then the camera will remind you the day
●
before the expiration day. 1 to 30 days are available. Seven days is the default reminding days.
If you set the reminding day before expiration to 1, and the detection time to 10:00, and the
●
certificate will expire in 9:00 the next day, the camera will remind you in 10:00 the first day.
3. Click Save.

14.15.5 Set SSH

SSH is a protocol to ensure security of remote login. This setting is reserved for professional
maintenance personnel only.
Steps
1. Go to Configuration → System → Security → Security Service .
2. Check Enable SSH.
3. Click Save.

14.15.6 Set HTTPS

HTTPS is a network protocol that enables encrypted transmission and identity authentication,
which improves the security of remote access.
Steps
1. Go to Configuration → Network → Advanced Settings → HTTPS .
2. Check Enable .
3. Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4. Click Delete to recreate and install certificate.
Create and install self-signed certificate
Create certificate request and install certificate Refer to
5. Click Save.
Refer to
105