Network Traffic Camera (for Traffic Flow Camera) User Manual
2. Enable the FTP server.
3. Optional: Check Upload Additional Information, and then the related information can be
attached when uploading.
4. Set FTP parameters.
1) Enter Server Address and Port.
2) Enter User Name and Password, and confirm the password.
3) Select Directory Structure.
Note
If multiple directories are needed, you can customize the directory name.
5. Optional: Check Not Upload Plate Close-up if the license plate close-up pictures are not needed
to upload.
6. Optional: Click FTP Test to test the server connection.
7. Set the name rule and separator according to the actual needs.
8. Optional: Edit OSD information which can be uploaded to the FTP server with the pictures to
make it convenient to view and distinguish the data.
9. Click Save.
4.1.3 Set Listening Host
The listening host can be used to receive the uploaded information and pictures of the device
arming alarm.
Before You Start
The listening service has been enabled for the listening host, and the network communication with
the device is normal.
Steps
1. Go to Configuration → Device Configuration → System → Network Interface Parameters .
Figure 4-2 Set FTP
16