Voltage Check - HP Integrity rx8620 User's & Service Manual

Cabling and Power Up

Voltage Check

Voltage Check
This section provides voltage check information for use on the customer site. The emphasis is on measuring
the voltages at the power cord plug end specified as an IEC-320 C19 type plug. This is the end that plugs
directly into the back of the server cabinet.
NOTE These procedures need to be performed for each power cord that will be plugged directly into
the back of the server cabinet. If the expected results from this procedure are not observed
during the voltage check, refer to the section titled "Voltage Check (Additional Procedure)" on
page 76.
72
Chapter 4