Figure 4-11 Bps Led Location - HP Integrity rx8620 User's & Service Manual

Cabling and Power Up
Turning On Housekeeping Power and Logging in to the MP
Figure 4-11 BPS LED Location
3. Log in to the MP:
a. Enter Admin at the login prompt. (This term is case-sensitive.)
It takes a few moments for the MP prompt to appear. If it does not, be sure the laptop serial device
settings are correct: 8 bits, no parity, 9600 baud, and None for both Receive and Transmit. Then, try
again.
b. Enter Admin at the password prompt. (This term is case-sensitive.)
88
BPS LED Location
Chapter 4