Table 1-1. Cell Board Cpu Load Order; Figure 1-7. Cpu Locations On Cell Board - HP Integrity rx8620 User's & Service Manual

Introduction
Detailed HP Integrity rx8620 Server Description
When installing dual-core CPUs, if only one CPU module is installed on the cell board, a
NOTE
terminator must be installed in CPU socket 2.
Table 1-1 Cell Board CPU Load Order
Number
of CPUs CPU 2 Location
Installed
Two Terminator
Four CPU installed
Six CPU installed
Eight CPU installed
Figure 1-7 CPU Locations on Cell Board
DIMMS
The memory DIMMs used by the HP Integrity rx8620 Server are custom designed by HP and are identical to
those used in the Superdome server. Each DIMM contains SDRAM memory components and is qualified to
run at 125MHz. The CPU chip set will not support traditional DRAMs.
22
CPU 3 Location
Empty slot
Empty slot
Empty slot
CPU installed
CPU 3 Controller
CPU 2
CPU 1 Location
Empty slot
Empty slot
CPU installed
CPU installed
Cell
CPU 0
CPU 1
CPU 0 Location
CPU installed
CPU installed
CPU installed
CPU installed
Chapter 1