Overview - HP Integrity rx8620 User's & Service Manual

Introduction

Overview

Overview
The HP Integrity rx8620 Servers are 17U
stand-alone servers that accommodate up to 128GB of memory, PCI-X I/O, and internal peripherals including
disks and DVD or tape drives. High-availability features include N+1 hot-swap fans and power, redundant
power cords, and hot-plug PCI cards and hard disk drives. Features of the server include:
• Up to 128GB of physical memory provided by dual in-line memory modules (DIMMs).
• Up to 32 processors with a maximum of four processor modules per cell board and a maximum of four cell
boards.
• One cell controller (CC) per cell board.
• All CPUs and cell controllers on the cell boards are cooled with turbo cooler fans.
• Four embedded hard disk drives. Available sizes are 36GB, 73GB, and 146GB drives.
• Two internal DVD drives or one DVD drive and one 40GB DDS-4 DAT drive.
• Nine front chassis mounted N+1 fans.
• Twelve rear chassis mounted N+1 fans.
• Six N+1 PCI-X card cage fans.
• Six N+1 bulk power supplies.
• Two PCI power supplies.
• Sixteen PCI-X slots divided into two partitions. Each partition can accommodate up to eight PCI cards.
• Two core I/O cards.
1. The U is a unit of measurement specifying product height. 1 U is equal to 1.75 inches.
14
1
high, 16-socket symmetric multiprocessor (SMP) rack-mount or
Chapter 1