HP Integrity rx8620 User's & Service Manual page 158

Removal and Replacement
Removing and Replacing the Core I/O
ping 198.168.1.1 -n 2
4. Use the
telnet 192.168.1.1
command from the PC or workstation to connect to the management processor.
Step 2. From the management processor Command menu, enter LS to list the current network settings,
and, if needed, use the LC command to reconfigure the network settings for the management
processor.
The LC command enables modifications to the customer LAN and/or the private LAN configuration.
Cancel all changes to the management Processor LAN configuration at any time by replying Q to
any of the LC command prompts.
Step 3. Ensure that the MP networking configuration is correct.
158
Chapter 6