Advertisement
PA-W1400
(3) Cautions
[2] Specifications
1. Be sure to disconnect the power supply plug before disassembly.
2. The power must be turned off when installing or removing the
eae
F
PWB.
(1) Specification
3. Hold the connector area when fastening or unfastening the con-
Xx 1 The ribbon (1) must always be used in pair with the correction
nector. Never manipulate the cable.
tape (2). Otherwise, it may fail to correct.
4. Do not bend the carriage wire too often as it is not robust against
@
'ZX-3FS1]
Except
|Fabric ribbon
ZX-4CT
[U.S.A | Cover-up correction tape (dual paci)
Reference to "[2]-(2). Option print vn eels",
(3) Print wheels
Advertisement
