Advertisement
PA-W1400
9-12. Checking correction quality (including
[Printout]
linefeed correction)
2) Press the [TAB] key four times.
3) Type the
[H] key to print ten characters.
[Check]
4) Press the [RETURN] key.
1) Each draw line should not have a deviation of more than 0.07mm.
5) Repeat above steps 1) thru 3) once again.
6) Press the
key to erase all characters typed.
P=
[Printout]
9-13. Checking correction quality (in the boldface
mode)
[Operation]
Type [CODE]
+/B
|, [LOCK]
, [W] key for ten times.
Bold
Press the | <j | key to erase five characters.
Press the [TAB] key five times.
'Type the [W] key to print ten characters.
CLR IND
TYPE
|+
SPACE]
keys to print ten characters.
LOCK FE ~ | [SPACE] [RETURN] keys to print ten characters.
[Printout]
[Check]
Check to see that there is ghost (smear) in umlaut and accents.
9-15. Checking line draw quality
[Operation] (Use the line space of "1*.)
1 Press [KEI]. [F
ERS
RETURN] keys.
[Sean |
2) Repeat the above step 1) three times.
Advertisement
