Advertisement
PA-W1400
3. LCD cabinet (Fig. 5-4)
(1) Remove the upper cabinet. (See "1. Upper cabinet.")
(7) Remove LCD unit © and volume knobs @ and @. (Handle with
(2) Remove the LCD unit. (See "2. LCD unit.")
care. They are fragile.)
(3)
Putthe LCD unit upside down, and remove four screws ©.
(8)
Remove connector ©) o invertor unit @ and remove CCFT
e k .
'
(cool cathode ray tube)
®.
(4)
Insert a screwdriver into
position ® to open the display cabinet
o
BQ.
Postion,
©1099
iia
eas
(9) Remove
two stay rubbers A @ and stay rubber
B @.
(5) Remove the four screws @ and remove the stay angle @.
(10) Remove the invertor unit @ from two pawis on display cabinet A
(Be careful that the installing direction differs in the PA-W1400
®.
to make contact with CCFT (cool cathode ray tube) ®.
Pe
i
|
|
iy
s
1
PA-W1400
f ¢
PA-W1410
The chipped part
Fig. 5-4)
Advertisement
