Advertisement
PA-W1400
Reassembly procedure
i
ly
u n i t , the AC cord
Follow the direction next to connect the power supply unit with the
aed eo Unie eB wotaad. Wi ihe (oN
(1) Because the end of the AC cord is cut as shown in Fig. 5-49 and
Fa aha te One tol peuded
4
Fig. 5-50, make two or three turns of the wire around the trans-
former terminals @ L and N as shown in Fig. 5-44, then bind the
wires with solder. (For the polarity L is discriminated from R on
the AC cord ®, you must confirm the polarity before binding the
wire with solder. See Fig. 5-45, Fig. 5-49 and Fig. 5-50.
(2) After binding the AC cord ® wires, hold it to the transformer ®
using the wiring tie @, as shown in Fig. 5-48.
For mecha frame
N polarity side
[Fig. 5-45]
' [Fig 5-46]
Color: Brown
N
rede rit Ge
|
:
Color Blue
-
i
165415
[Fig. 5-49]
Memo
Yellow/Green
Advertisement
