Advertisement
8-6. Carriage motor and belt
Disassembly procedure
1) Loosen the screw B1, remove the hook B to the main frame, and
remove the carriage motor frame unit @.
2) Remove three screws (B2 x 2) and remove the carriage motor @.
3) After the shaft © was removed, all components now be ready to
be disassembled.
Re-assembly procedure
Observe the reverse sequence of the disassembly procedure.
NOTE: 1) The screw B1 is provided for adjustment. For more infor-
e
mation, see Paragraph [6] 6-6.
[Fig. 5-39]
(B2)
PA-W1400
(B2)
Advertisement
