Time Left; Total Infused; Occlusion Limit; Working With Menus - B. Braun OUTLOOK 200 Operator's Manual

OUTLOOK" 200 wrri Dosescan" OPERATOR'S MANUAL
INFORMATION SCREEN
During an infusion, the Information Screen will display the Time Left and Total Infused.
Time Left
This displays the hours and minutes required to infuse the volume to be delivered at the
current rate. As the rate and volume to be delivered are changed, the Time Left will be
recalculated.
NOTE: If the Time Left is greater than 99 hours and 59
minutes, the Information Screen will not display the Time
Left =.
Total Infused
This displays the total volume infused in milliliters since the Total Infused value was last
cleared. The Total Infused may be cleared while the pump is running. To clear the Total
Infused, see "Clear Total Infused" in Chapter 10: Options.
Occlusion Limit
This displays the current Occlusion Limit setting. To change this setting, see "Occlusion
Limit" in Chapter 10: Options.
WORKING WITH MENUS
There are three menus in which the special operating modes and other options available in the
Outlook™ 200 may be found.
22
Main Menu
The Main Menu is the first menu to appear when MENU is pressed. This menu usually con-
tains the most frequently accessed modes and options.
Alternate Menu
Located second from the bottom of the Main Menu is the Alternate Menu. The Alternate
Menu commonly holds items which are less frequently accessed.
Biomed Options Menu
The Biomed Options Menu is located second from the bottom of the Alternate Menu and
contains programming information and settings. The Biomed Options Menu requires an
access code and is intended to be accessed only by those authorized to change the settings
of the device.
1. Press MENU to see the Main Menu list of options.
2. Use the CURSOR to move the highlight and scroll through the list.
3. Ifthe option desired is not found in the Main Menu, highlight "Alternate Menu,"
then press ENTER.
4. Once you have found the desired mode or option, highlight it and press ENTER.
950952 Rev A (9/03)