B. Braun OUTLOOK 200 Operator's Manual page 58

OUTLOOK ™ 200 wrn posEscaN OPERATOR'S MANUAL
SCHEDULE NEXT RUN
This feature lets the user delay an infusion from STANDARD, PIGGYBACK, DOSE,
PROGRAM, or PROFILE Mode for up to 24 hours.
NOTE: All of the Mode information must be entered and a
" set must be in the pump before accessing this feature.
1. Press MENU.
2. Use the CURSOR to highlight "Schedule Next RUN", then press ENTER.
TO CHANGE THE TIME
1. Use the CURSOR to highlight the Time is
Schedule Next RUN
field.
一 一
2.
Use the DATA keys to set the correct time
Time is 12:30p .
(in military time).
Delay hr 00 min
Start at 14:30p
ACCEPT 02H00M DELAY
TO CHANGE THE DELAY
1. Use the CURSOR to highlight the Delay "hr" or "min" fields.
2. Use the DATA keys to set the hours and minutes.
TO CHANGE THE START TIME
NoTE: The time is displayed in military time. Use 00:00 to
< represent midnight and 12:00 to represent noon.
1. Use the CURSOR to highlight Start at fields.
2. Use the DATA keys to change the start time.
3. Use the CURSOR to highlight "ACCEPT XXH XXM DELAY", then press ENTER.
The information is displayed on the Information Screen, "Delay" is shown, and the yellow
Hold LED will blink. Press HOLD to cancel Schedule Next RUN.
52 950952 Rev A (9/03)