Table of Contents
Advertisement
Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
Figure 3-6: Pole or Wall Mounting Bracket
Follow the steps below to install the Auroa243 gNB on a pole.
1. Unscrew the nuts of the pole mounting bracket, slide the two clamps to the left, and turn them
up or down (Figure 3-7).
Figure 3-7: Turn Clamps
2. Place the pole mounting bracket against the pole and return the clamps to the horizontal
position. Next, slide the clamp to the right and retighten the nuts (Figure 3-8).
Figure 3-8: Place Bracket on Pole
18
Advertisement
Table of Contents
