Figure 3-17: Power Adapter; Figure 3-18: Dc Power Terminal - Baicells Aurora243 Installation Manual

Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
• If the gNB and the power supply are both AC, assemble the plug according to the labels and
instructions on the plug.
A power adapter must be used if the gNB is DC and the power supply is AC (Figure 3-17). A
•
power plug is installed on the cable connected to the input direction. Refer to the labels on
the outlet for connecting the live, neutral, and ground wires separately to the corresponding
terminals, and tighten the screws.

Figure 3-17: Power Adapter

NOTE: If a power adapter is used, it must be connected to a surge arrester. Grounding and
waterproofing are required, and place all components in a waterproof distribution box.
2. Assemble the power terminal for the gNB.
The gNB supports DC or AC power supplies. The gNB provides power terminals based on the power
supply mode selected by the customer. If using a DC power supply, refer to Figure 3-18. If using an AC
power supply, refer to Figure 3-19.
DC Power Supply:
•
Refer to the labels on the power plug for connecting the positive terminal (+) and the
negative terminal (-) to the corresponding terminals separately and tighten the screws.

Figure 3-18: DC Power Terminal

25