Table of Contents
Advertisement
Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
4.1.7 Verify gNB Operational Status
After the gNB reboots, check the gNB status using the gNB GUI. Once the gNB is mounted at its intended
destination and powered on, recheck the status settings.
gNB GUI: Go to Basic Setting > Basic Info (Figure 4-11) and check if the Cell Status and NG Status
•
field shows Active. Also, check that GPS Sync Status is reported as Synchronized.
Figure 4-11: Verify Operational Status
Before commercial deployment, Baicells recommends implementing cell site acceptance testing of a new
site to ensure the service meets expectations, document network speeds at various cell locations, and
verify RF coverage.
37
Advertisement
Table of Contents
