Figure 3-9: Attach Gnb To Bracket; Figure 3-10: Tighten Bolt And Screw - Baicells Aurora243 Installation Manual

Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
3. Hold the gNB vertically and align the two pins on the gNB bracket with the pin holes on the pole
mounting bracket. Next, push the eNB down until the hooks are firmly attached to the
corresponding slots on the pole mounting bracket (Figure 3-9).

Figure 3-9: Attach gNB to Bracket

4. Tighten the bolt and screw on the top of the gNB with a Phillips-head screwdriver (Figure 3-10).

Figure 3-10: Tighten Bolt and Screw

5. Once the installation is complete, proceed to section 3.4.
19