Upgrade Firmware; Figure 4-4: Home Page; Figure 4-5: Upgrade Firmware - Baicells Aurora243 Installation Manual

Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide

Figure 4-4: Home Page

4.1.4 Upgrade Firmware

Verify that the Software Version in the Basic Info pane is the most recent firmware version. Follow the
steps below to upgrade to the most recent software version before configuring the gNB.
1. Download the most recent firmware file from Baicells.com > Support > Firmware, and save it on
your local computer.
2. Go to System > Upgrade and select whether to preserve the current settings (Figure 4-5).
3. Click Select File and navigate to the firmware file saved on the local computer.
NOTE: The file type is *.EXT.
4. Click Upgrade Now.
5. In the pop-up window, click PROCEED.
6. Reboot the gNB, wait for a few minutes, and login back to the gNB GUI to confirm the upgrade.
7. On the Basic Setting > Basic Info page, the upgraded version is displayed in Software Version.

Figure 4-5: Upgrade Firmware

33