Table of Contents
Advertisement
Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
Overview
1.
1.1 Introduction
The Baicells Aurora243 (Figure 1-1) is an advanced outdoor 5G Sub-6G integrated base station (gNodeB)
designed and developed based on Qualcomm 5G System on a Chip (SoC) solution. This 2X10W gNB is
compliant with Third-Generation Partnership Program (3GPP) Release 15 New Radio (NR) Time Division
Duplexing (TDD) technology and supports broadband data access, providing various data service
transformation and transmission capabilities to enable indoor wireless coverage. This gNB consumes low
power, has a small form factor, and is easy to maintain. As a result, the Aurora243 enables operators to
enhance coverage performance, improve network capacity, and eliminate blind spots for their 5G
networks while reducing overall system power consumption.
Figure 1-1: Aurora243 gNodeB
Each gNB is pre-configured to simplify the installation. In addition, Baicells provides operators with local
and Web-based Graphical User Interface (GUI) software applications to configure and manage individual
gNBs and Customer Premise Equipment (CPE).
Additionally, Baicells offers a centralized Software-as-a-Service (SaaS) solution called CloudCore.
CloudCore includes all the essential LTE Evolved Packet Core (EPC) network functions, an Operations
Management Console (OMC) for managing multiple sites across the network, and a Business and
Operation Support System (BOSS) for subscriber management.
In this document, you will find a general description, guidelines, and procedures for installing, entering
basic configuration information, and verifying the operational status of the gNB.
8
Advertisement
Table of Contents
