Table of Contents
Advertisement
Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
Safety Information
For the safety of installation personnel and the protection of the equipment from damage, please read all
safety warnings. If you have any questions concerning the warnings before installing or powering on the base
station, contact the
Baicells support
WARNING:
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with
standard practices for preventing accidents.
WARNING:
Read the installation instructions before you connect the system to its power source.
WARNING:
Equipment installation must comply with local and national electrical codes.
WARNING:
This product relies on the existing building or structure for short-circuit (overcurrent)
protection. Ensure that the protective device is rated no greater than 20A.
WARNING:
Do not operate this wireless network device near unshielded blasting caps or in an
explosive environment unless the device has been modified and qualified for such use.
WARNING:
To comply with the United States Federal Communications Commission (FCC) Radio
Frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches
(20 centimeters) or more from the body of all persons.
team.
iv
Advertisement
Table of Contents
