Aurora243 Outdoor 2x10W TDD gNodeB Installation Guide
4.1.5.3 Configure PLMN/Slice/TAC
Configure the PLMN ID/Slice/TAC related parameters according to the actual network deployment.
1. Go to NR Setting > PLMN. Under the PLMN Identity Info List, enter the PLMN menu to configure the
IP address of the WAN interface.
Figure 4-9 Configure PLMNID/Slice/TAC-Aurora243
4.1.6 Reboot
Once the basic configuration settings are saved, reboot the gNB. Go to the Basic Setting > Basic Info page.
Select the Welcome message (Figure 4-10) and choose Reboot from the drop-down menu.
Figure 4-10: Reboot
36