Danger: Moving Auger; Danger: Electrical Hazard; Caution; General Information - Chore-Time H2 PLUS Installation & Operator's Instruction Manual

Model H2™ Plus Feeding Systems
Safety Information
Follow Safety Instructions
Carefully read all safety messages in this manual and on your equipment safety signs. Follow recommended
precautions and safe operating practices.
Keep safety signs in good condition. Replace missing or damaged safety signs.
Decal Descriptions

CAUTION:

Use caution when working with the Auger—springing Auger may cause personal
injury.

General Information

Support Information
The Chore-Time MODEL H2® Plus Feeding System is designed to feed poultry feed types. Using this equipment for
any other purpose or in a way not within the operating recommendations specified in this manual will void the warranty
and may cause personal injury.
This manual is designed to provide comprehensive planning and installation information. The Table of Contents
provides a convenient overview of the information in this manual.
6

DANGER: Moving Auger

This decal is placed on the Panel Weldment.
Severe personal injury will result, if the electrical power is not
disconnected, prior to servicing the equipment.

DANGER: Electrical Hazard

Disconnect electrical power before inspecting or servicing equipment
unless maintenance instructions specifically state otherwise.
Ground all electrical equipment for safety.
All electrical wiring must be done by a qualified electrician in
accordance with local and national electric codes.
Ground all non-current carrying metal parts to guard against electrical
shock.
With the exception of motor overload protection, electrical disconnects
and over current protection are not supplied with the equipment.
Manboot 3/98