Assemble The Feed Cone And Center Support; Assemble The Center Support And Feed Cone To Feed Pan - Chore-Time H2 PLUS Installation & Operator's Instruction Manual

Model H2™ Plus Feeding Systems
Connect the two ends of the Support Cords together
with the Cable Clamp. This will keep the cords from
sliding back through the hole while the remainder of the
feeder is assembled. See Figure 20.
Figure 20. Assembling Support Cord to Feed Cone

Assemble the Feed Cone and Center Support

Align the three legs of the Center Support and the three tabs on the Feed Cone. Align the arrow on the Feed
Cone with the part number on the Center Support. Start the tabs in the three legs, apply down pressure the
tabs should snap into the legs of the Center Support. See Figure 21.
Arrow on Feed Cone
Center Support

Assemble the Center Support and Feed Cone to Feed Pan

1. Broilers: Position the lip of the feeder pan in the #2 tab of 2 of the struts. See Figure 22.
Turkeys: Position the lip of the feeder pan in the #4 tab of 2 of the struts. See Figure 22.
14
Figure 21. Assembling Support Cord to Feed Cone
Strut on Model H2 Plus Feed cone
Position the Feeder Pan lip in setting #2 for broilers
Position the Feeder Pan lip in setting #4 for turkeys
Figure 22. Feeder Cone Strut (side view)
Feed Cone
Part Number on Center Support
cone2