Safety Instructions; Follow Safety Instructions; Decal Descriptions; Danger: Moving Auger - Chore-Time H2 Installation And Operator's Manual

Feeding system

Hide thumbs Also See for H2:

Table of Contents

MODEL H2™ Feeding System

Safety Instructions

Carefully read all safety messages in this manual and on your equipment safety signs. Follow recommended

precautions and safe operating practices.

Keep safety signs in good condition. Replace missing or damaged safety signs.

This decal is placed on the Panel Weldment.

Severe personal injury will result, if the electrical power is not

disconnected, prior to servicing the equipment.

Disconnect electrical power before inspecting or servicing equipment

unless maintenance instructions specifically state otherwise.

Ground all electrical equipment for safety.

All electrical wiring must be done by a qualified electrician in accordance

with local and national electric codes.

Ground all non-current carrying metal parts to guard against electrical

shock.

With the exception of motor overload protection, electrical disconnects and

over current protection are not supplied with the equipment.

Use caution when working with the Auger—springing Auger may cause personal

injury.

MF830E

Safety Instructions

Manboot 3/98

Table of Contents

Do you have a question about the H2 and is the answer not in the manual?