Chore-Time H2 PLUS Installation & Operator's Instruction Manual page 31

Model H2™ Plus Feeding Systems
Intermediate Control with Sensor Plus Switch Installation
Assemble the Mid-Line Control to the Feeder Tube, as
shown in Figure 59.
Attach the Switch Box Assembly to the Feeder Tube
with Hose Clamps as shown in Figure 59.
Install a toggle switch, out of reach of the birds, to
disconnect power to the Mid-Line Control. This allows
the Mid-Line Control to serve as a standard feeder
when not used as a control feeder.
Wire the Mid-Line Control as shown in the wiring
diagram section of this manual.
Figure 59. Intermediate Control Installation
31