Intermediate Control - Chore-Time H2 PLUS Installation & Operator's Instruction Manual

Intermediate Control Units are available for the Model H2 Plus Feeder. The Intermediate Controls are
shown in Figure 55.
H2 Plus Intermediate control
with proximity switch
The Intermediate Control makes it possible to operate the feeding system when birds are confined away
from the End Control Unit. Chore-Time recommends placing the Intermediate Control Feeder at least 2 pans
away from the curtain or partition. See Figure 56.
1. New Feeder Lines: Leave one feeder pan assembly off the feeder tube at the point where the
Intermediate Control needs to be placed. The feeder line can be assembled and suspended before
attaching the Intermediate Control; or the Intermediate Control may be attached to the feeder tube
when the other pans are installed.
Existing Feeder Lines: Cut the Grill Support and remove the feeder pan at the location where the
Intermediate Control will be installed.
Feed Hopper
Figure 56. Intermediate Control Location Diagram (Top View)

Intermediate Control

Figure 55. Intermediate Control Units (Side Views)
Model H2™ Plus Feeding Systems
H2 Plus Intermediate control
with mechanical switch
Feeder Pans
Intermediate Control Unit
Curtain
29