Analog Output - KEB COMBIVERT S6 Instructions For Use Manual

4.2.4.2 Absolute input
Specification (absolute input)
Connection
4.2.5 Analog output
Specification
Connection
ma_dr_s6-cu-p-inst-20156056_en
Number
Name
Terminals
Classification
Input signals
Voltage input
Others
Connection of the analog absolute input AN3
DC 0,2...10 V
Number
Name
Terminals
Classification
Voltage output
Minimum load impedance
Notes
Connection of the analog output ANOUT
22
21
Connection of the control | 4
1
AN3
X2A.1 (standard: digital input DI1); can
be used as analog input AN3 depending
on the firmware.
non-isolated absolute input
Voltage
DC 0.2...10 V / max. 5 mA
Is not intended for control with poten-
tiometer. The voltage source must be
able to supply the input current.
1 9
+
1
ANOUT
X2A.22 analog output
X2A.21 reference potential
DIN EN 61131-2
DC 0.0...10 V (corresponds to 0...100 %
output value)
1 kΩ
In the range up to 0.1 V the output value
is not linear to the output voltage.
U =0,0...10 V
DC
Z =1 kΩ
min
23