Vcc - Led; Net St - Led; Dev St - Led; Opt - Led - KEB COMBIVERT S6 Instructions For Use Manual

3 | Product description
3.13.2 VCC - LED
3.13.3 NET ST - LED
3.13.4 DEV ST - LED
3.13.5 OPT - LED
16
LEDs Status
VCC off
NET ST
DEV ST
OPT
VCC
Initialization
NET ST
DEV ST
OPT
VCC ready for operation
NET ST
DEV ST
OPT
Tab. 3: LEDs at power on
VCC LED colour Description
off - Power supply of the control card switched off.
on green Control is supplied with 24 V.
Tab. 4: Function VCC LED
NET ST LED colour Description
off - Device off or booting.
Blink various depending on fieldbus => fieldbus interfaces.
code
Tab. 5: Function NET ST - LED
DEV ST LED colour Description
OFF - Device off or in boot process.
ON Red Error
ON Yellow No error, DC bus not charged.
ON Green No error, ready for operation.
Flashing Green No error, serves to identify the device (fb.32).
Tab. 6: Function DEV ST - LED
OPT LED colour Description
- - reserved for options.
Tab. 7: Function OPT - LED
Note
Device off
Control is supplied with 24 V
Device is ready for operation and the LEDs start
with their normal function (approx. 3 s)
ma_dr_s6-cu-p-inst-20156056_en
KEB Automation KG