Good Read: When To Indicate; Green Spot Duration - Datalogic PowerScan PD9600 Product Reference Manual

LED AND BEEPER INDICATORS

Good Read: When to Indicate

This feature specifies when the reader will provide indication (beep and/or flash its
green LED) upon successfully reading a bar code.
$CBPIN00
Indicate Good Read = After Transmit
$CBPIN02

Green Spot Duration

Specifies the duration of the good read pointer beam after a good read.
$CLSSP00

Green Spot Duration = Short (300 msec)
$CLSSP02
Green Spot Duration = Long (800 msec)
ENTER/EXIT PROGRAMMING MODE

Indicate Good Read = After Decode
$CBPIN01
Indicate Good Read =
After CTS goes inactive then active
Green Spot Duration = Disable (Green Spot is Off)
$CLSSP01
Green Spot Duration = Medium (500 msec)
$CLSSP03
PRODUCT REFERENCE GUIDE
107