Table of Contents
Advertisement
SETUP
PARTS OF THE READER
The LED on the reader provides information about the data transmission.
1. Power/Status LEDs
2. Beeper Output
5. USB Cable Retainer (Only for GFS4520)
ATTACHING AND RETAINING THE USB CABLE (GFS4520
MODEL ONLY)
1. While pressing the retainer's locking wings, slide to pull it out of its housing.
2. Rotate the retainer clockwise and insert the USB cable.
3. Set back the retainer by rotating it counterclockwise and push until the cable is
6
GRYPHON™ GFS4500
1
2
firmly locked.
NOTE: Different microUSB cable sizes can be used. Ensure the connector
shell size does not exceed 18.0 mm (w), 7.0 mm (h), 10.8 mm (d). Use only
straight USB connectors, do not use right-angled connectors.
3
3. Scan Window
4. Trigger
4
5
Advertisement
Table of Contents
