Power Off; Reading Parameters; Good Read Green Spot Duration - Datalogic PowerScan Retail PBT9501-RT Quick Reference Manual

Industrial cordless handheld area imager bar code reader

Table of Contents

Power Off

Scan the bar code below to shut off power to the BT hand-

held until the next trigger pull.

PowerOff

Move the reader toward the target and center the aiming

pattern and illumination system to capture and decode

the image. See

Using the PowerScan™ PBT9501-RT on

page 2

for more information.

The aiming system will briefly switch off after the acquisi-

tion time, and if no code is decoded will switch on again

before the next acquisition. The illuminator will remain on

until the symbol is decoded.

As you read code symbols, adjust the distance at which

you are holding the reader.

Successful reading can be signaled by a good read green

spot. Use the bar codes that follow to specify the duration

of the good read pointer beam after a good read.

ENTER/EXIT PROGRAMMING MODE

Disabled

Short (300 ms)

PowerScan™ Retail PBT9501-RT

Table of Contents