ENTER/EXIT PROGRAMMING MODE
Aiming LED intensity
With the following settings the intensity of Aiming LED can modified if needed.
$CLAAI00\r
Set Aiming Intensity Level = Mid
$CLAAI02\r
Object Sense Aiming Enable
Enables/Disables the aimer while in object sense watch state.
$CSNAE00\r
Set Object Sense Aiming = Enabled
90
GRYPHON™ GFS4500
READING PARAMETERS
Set Aiming Intensity Level = Low
$CLAAI01\r
Set Aiming Intensity Level = High
Set Object Sense Aiming = Disabled
$CSNAE01\r