Reading Parameters; Aiming System; Good Read Green Spot Duration - Datalogic Gryphon GBT4500 Series Quick Reference Manual
General purpose handheld area imager bar code reader with bluetooth wireless technology or star cordless system
Hide thumbs
Also See for Gryphon GBT4500 Series:
- Product reference manual (354 pages) ,
- Reference manual (356 pages)
Table of Contents
Advertisement
Reading Parameters
READING PARAMETERS
Move the reader toward the target and center the aiming
pattern and illumination system to capture and decode
the image. See
"Using the Gryphon™ I GBT/GM4500" on
page 14
for more information.
The aiming system will briefly switch off after the acquisi-
tion time, and if no code is decoded will switch on again
before the next acquisition. The illuminator will remain on
until the symbol is decoded.
As you read code symbols, adjust the distance at which
you are holding the reader.
Aiming System
A number of options for customizing control of the Aiming
System are available. See the Gryphon™ I GD/GBT/
GM4500 PRG for more information and programming bar
codes.
Good Read Green Spot Duration
Successful reading can be signaled by a good read green
spot. Use the bar codes that follow to specify the duration
of the good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Disable
★ Short (300 ms)
29
QUICK REFERENCE GUIDE
Hide quick links:
Advertisement
Table of Contents
