ENTER/EXIT PROGRAMMING MODE
Maxicode Set Length 2
This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
199
fixed length if in Fixed Length Mode. Characters can be set from 0001 to 0145 characters
in increments of 0001 (pad with zeroes).
See "
Select Maxicode Length 2 Setting
$CMXL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
200
GRYPHON™ GFS4500
Set Length 2" on page 242
Length 2 is 0145 Characters
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
2D SYMBOLOGIES
Maxicode Length Control" on page
Appendix E, Keypad
represent-
CANCEL