ENTER/EXIT PROGRAMMING MODE
Matrix 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for "
page 142
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Matrix 2 of 5 Length 1 Setting
$CM2L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Matrix 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for "
page 142
ond fixed length if in Fixed Length Mode. The length includes the bar code's check and
data characters.
The length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this
length (only one fixed length). See "
gramming instructions.
Select Matrix 2 of 5 Set Length 2 Setting
$CM2L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
140
GRYPHON™ GFS4500
. Length 1 is the minimum label length if in Variable Length Mode, or the first
Length 1 = 08 (8 characters)
. Length 2 is the maximum label length if in Variable Length Mode, or the sec-
Length 2 = 50 (50 characters)
Standard 2 of 5 Length Control" on
Set Length 1" on page 241
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix E, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Standard 2 of 5 Length Control" on
Set Length 2" on page 242
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix E, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
1D SYMBOLOGIES
for more
represent-
for more detailed pro-
represent-