APPENDIX B
GFS4400 MOUNTING ADAPTER
USING THE GFS4400 ADAPTER
Customers can take advantage of the accessory "Mounting Adapter to replicate the
GFS4400 fixing holes" (Part Number: MA-4500-BK) to replace their setups based on pre-
vious Gryphon
products have different mounting holes, the Adapter Plate can be attached to the
GFS4500 to replicate the same mounting holes of the previous GFS4400.
Two M3x10 screws are required to attach the Mounting Adapter to the GFS4500
(already included in MA-4500-BK package).
M3 screws are then required to attach the adapter to the surface, maximum length is
6mm (not included in MA- 4500-BK package).
TM
I GFS4400 family, with the new Gryphon
TM
I GFS4500. Since the two
PRODUCT REFERENCE GUIDE
257