Table of Contents
Advertisement
G4-504HD2a User Guide
Configuring the G4-504HD2a
Resolution
Frame Rate
Quality
Likewise, for channel 5 (which is a Digital IP
Camera channel), only enable the channel if
there is a Digital IP camera connected.
Drop list for selecting the resolution to record
the video on this channel (applicable to
channels 1 to 4 if Analog cameras are
connected):
CIF (352x240)
▪
WCIF (464x240)
▪
HD1 (704x240)
▪
WHD1 (928x240)
▪
D1 (704x480)
▪
WD1 (928x480)
▪
For the Analog HD cameras (channels 1-4) and
Digital IP Camera (channel 5), the drop list
contents will change to reflect the supported
resolutions of the currently attached Analog
HD and IP cameras. Most commonly, these will
typically be:
720P (1280x720)
▪
DEFAULT SETTINGS:
For channels 1 to 4 (analog camera channels),
set the following:
D1
▪
For channels 1 to 4 (Analog HD channels), set
the following:
720P
▪
For channel 5 (Digital IP camera) set the
following:
720P
▪
Drop list allowing you to select the frame rate
(in terms of frames per second) that you would
like to record at.
DEFAULT SETTINGS:
For all channels (1 to 5), set the following:
15
▪
Drop list allowing you to select the encoding
quality (on a scale of 1 to 8 – where 1 is best).
88 of 151
Advertisement
Table of Contents
