Table of Contents
Advertisement
G4-504HD2a User Guide
Speed Threshold: Numeric text field to key in the speed value over which the device will flag
▪
an over speed alarm.
Alarm Duration: Numeric text field to set the duration of the alarm (in seconds).
▪
Save Settings: Click the ( OK ) button to save the alarm settings.
▪
Back to Previous: Click the ( Cancel ) button to return to the previous screen without saving.
▪
Configuring the G4-504HD2a
Trigger
Linkage
DEFAULT SETTINGS:
Disabled/not applicable.
Click the ( Setup ) button under Trigger to
display the Trigger setup screen.
DEFAULT SETTINGS:
Disabled/not applicable.
Click the ( Setup ) button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm.
The Linkage setup screen enables you to
configure the following options:
Channel – checkboxes which allow you
▪
to select any combination of the
camera channels to be included in the
display and recording.
Post Recording – drop list which
▪
allows you to select the duration for
109 of 151
Advertisement
Table of Contents
