G4-504HD2a User Guide
Configuring the G4-504HD2a
Mirror CH
Resolution – drop list to select the
▪
resolution to record this channel at.
Available resolution options are QCIF
(176x120),
CIF
(704x240) and D1 (704x480).
Frame Rate – drop list allowing you to
▪
select the frame rate (in terms of
frames per second) that you would like
to record at.
Quality – drop list allowing you to
▪
select the encoding quality (on a scale
of 1 to 8 – where 1 is best).
Copy To – this feature allows you to
▪
copy the current channel's substream
recording settings directly to another
channel, thus allowing you to easily
and quickly replicate the substream
recording settings across channels.
Once you have selected the channel to
copy to, click on the ( Copy ) button to
make the copy.
Copy – click this button to copy the
▪
current
settings
channel.
OK – click this button to save the
▪
current settings for the channel.
Cancel – click this button to exit back
▪
to the previous screen without saving.
DEFAULT SETTINGS:
For all channels (1 to 5), set the following:
Enable – Checkbox – Selected
▪
Audio – Checkbox – Selected
▪
Resolution – CIF
▪
Frame Rate – 15
▪
Quality – 3
▪
Checkbox – select each checkbox to include the
associated camera channel into the dual stream
recording.
DEFAULT SETTINGS:
For channels 1 to 4 (Analog/Analog HD camera
channels), set the following:
Checkbox - Selected
▪
For channel 5 (Digital IP camera channels), set
the following:
(352x240),
HD1
to
the
selected
93 of 151