Table of Contents
Advertisement
G4-504HD2a User Guide
Configuring the G4-504HD2a
Record Mode
Notes on Record Mode –
Sub Record
DEFAULT SETTINGS:
Internal SD
▪
Drop list where you can select the dual stream
record mode:
Sub Record – record a copy of the
▪
video from selected channels to the
specified secondary storage, at a
separately configured (usually lower)
resolution and quality.
Mirror Record – record a copy of the
▪
video from selected channels to the
specified secondary storage, using the
same resolution and quality as the
main recording.
Alarm Backup – record only the
▪
alarm-triggered video to the specified
secondary storage.
None.
▪
DEFAULT SETTINGS:
Mirror Record
▪
If the Record Mode is set to Sub Record, then
you may click on the ( Setup ) button to
configure the quality and resolution of the
recorded video to be stored to the secondary
storage. This configuration needs to be done
for each individual camera channel.
The following options will be on the Substream
Setup screen:
Channel – drop list to select the
▪
particular channel to configure. When
a
channel
corresponding recording settings for
that channel will be displayed for
viewing and editing.
Enable – checkbox, if selected, would
▪
enable the substream recording for
this channel. If unselected, would mean
that video from this channel would not
be recorded and stored as part of the
substream.
Audio – checkbox, if selected, would
▪
include audio into the recording. If
unselected, there would be no audio
recorded for this channel.
is
selected,
the
92 of 151
Advertisement
Table of Contents
