Gatekeeper G4-504HD2a User's Operating Manual page 106

G4-504HD2a User Guide
Configuring the G4-504HD2a
Manual Snap
configure the settings for the snapshots to be
taken where there is an alarm event.
In the configuration screen, you will be able to
configure the snapshot settings for each
individual camera channel in turn:
Channel – this is a drop list allowing
▪
you to select a particular camera
channel. The
settings for this channel will be
displayed for editing.
Snap Enable – if the checkbox is
▪
selected, then this camera channel is
included when the DVR performs the
snap shots.
Resolution – this drop list enables you
▪
to select the resolution for the
snapshots. Available options are (HD1,
WHD1, D1, WD1, 720P).
Quality – this drop list enables you to
▪
select the quality of the snapshot on a
scale of 1 to 8 (where 1 is best).
Upload Type – checkboxes which
▪
allow you to select whether the
snapshots are to be uploaded to a
Server.
Snap Numbers – numeric text field to
▪
key in the number of snapshots that
will be taken.
Interval – numeric text field to key in
▪
the interval (in seconds) between
snapshots.
Copy To – this feature allows you to
▪
copy the current snapshot settings for
this channel to another channel, thus
allowing you to easily and quickly
replicate the snapshot settings for the
different camera channels. Once you
have selected the channel to copy to,
click on the ( Copy ) button to make
the copy.
DEFAULT SETTINGS:
Disabled/not applicable.
These settings are used for snapshots which are
taken manually by the user. Clicking the ( Setup
) button displays the snap link settings page
which allows you to configure the settings.
associated snapshot
106 of 151