Table of Contents
Advertisement
G4-504HD2a User Guide
Playback Start Time: This shows the selected playback time. Clicking on it will bring up the time
▪
control dialog which allows you to key in a specific time (in hh:mm:ss 24-hour time format) from
which to begin the playback.
Playback Start Time Marker: This vertical blue dotted line indicates the playback start time across
▪
the camera channels. If you are using a Finger Mouse or an ICD2, you can click and drag left
and right along the colored bars to quickly move the marker in order to select a different
playback start time.
Playback Video: After selecting the playback start time and specifying the camera channels,
▪
clicking ( Playback ) will proceed to the playback screen for the recorded video.
Export Video: Clicking the ( Export ) button will allow you to export the recorded video as a clip
▪
from a specified start and end time.
REC Search Step 4: Playing the Recorded Video
On the playback screen, pressing the ( Setup ) button on the IR Remote Control will toggle between
displaying and hiding the on-screen controls for the playback function. If you are using a Finger Mouse,
you can toggle the on-screen controls by pressing the Right Button, whereas with the ICD2, you would
just tap anywhere on the video. If there is no user input, then the on-screen playback controls will auto-
hide after 15 seconds of inactivity.
If more than one camera channel was selected for playback during the previous step, all the
selected channels will be displayed in quad screen mode (2x2 grid layout). With a Finger Mouse
or ICD2, you can easily select a single channel to view in full screen by double-clicking on it.
Viewing Recorded Data
50 of 151
Advertisement
Table of Contents
